 |
 |
 |
|
CanAm Maverick X3 Turbo R 2018-2021
2018-2019 X3 Turbo R all models (including Turbo R, X DS, X RS, Max R)
CanAm Maverick X3 Turbo 2017
2017 X3 models (including standard, X DS, X RS, Max)
Stage 3 Performance Package
- Treal Performance Exhaust
- 3.0" Race Full System with Resonator
- Dynojet Power Vision
- pwrTune Stage 3 (or Stage 3int) Tune
- Optional Velocity Intake Kit
Best bang for your buck performance package features the unbeatable Treal 3.0" exhaust. This is the best performance, looks and value X3 exhaust you can find on the market. Combined with a Power Tune programmed Power Vision that is ready to go with a Stage 3 tune. Add the optional Velocity Intake kit and upgrade to the Stage 3int tune for you X3.
Treal Performance 3.0" Full Exhaust SystemConfig 3: Full Race Exhaust with Resonator
2017-2021 CanAm Maverick X3
all models 2 or 4 seat
- Full 3.0 inch Turbo Back System
- 304 Stainless Steel
- Flex Coupler After Turbo
- Fully Tig Welded
- Center / Stock Exit
- Stainless Steel Resonator
- Rear Straight Pipe (no muffler)
- Max Power & Aggressive Sound
Treal
Performance full 3.0 inch turbo back exhaust for the Maverick X3, best
performance without being too loud. Most full exhaust systems on the
market will make similar power if they are at least 2.5 inches from the
Turbo back. The Treal Performance full 3.0 inch system matches any
exhaust on the top end, and test better by a notable margin out of the
hole. No exhaust will make more bottom end torque and horsepower in a
drag race launch or low end pull. And unlike many other systems that are
too loud or sound like an RZR this one has that sports car sound
similar to stock with the performance growl you are looking for.
Add
to that the killer all stainless look which exits out the center this
system is a top selection in the looks department. Run this with or
without the rear plastic cover. The sound is not obnoxiously loud like
you may thing a full 3.0 open system would be. The Full Race Exhaust
configuration 3 includes the stainless steel resonator and rear straight
pipe and is 4-6db louder than configuration 1.
Dynojet Power Vision PV3
Dynojet Power Vision now with pwrTune performance tuning for
the CanAm
X3 Maverick X3 is a performance tuner and
data monitor that offers the latest flash tuning technology,
real-time data monitoring, and more.
Using the Dynojet Power Vision you can now purchase one or more of
our performance tunes for your X3 and have the added benefit of live
telemetry, data logging, read and clear trouble codes, and more. Your
Power Vision unit will come pre-loaded with the tune(s) of your choice
customized with your options.
The Power Vision unit plugs into your vehicles data port, you
select your tune and program to your car (takes about 15 minutes). You can put back to stock anytime.
Once flashed with a performance tune the screen will show live
telemetry: engine temp, boost, throttle position, etc. You can leave the
Power Vision plugged in or you can disconnect and leave it in the
trailer, your tune will remain in your cars ECU.
For your 2017
you can also purchase a 2018 Turbo R fuel pump $280, send in your ECU
for upgrade to a stock 2018 Turbo R format, and then run these same 2018
Turbo R spec tunes on a Power Vision. There is no charge for the ECU
upgrade to 2018 Turbo R format but you will have to send your ECU in for
that. When putting your car back to a stock tune flash your stock tune
would then be stock 2018 Turbo R.
2018-2019 Performance Tuning Stages
- Stage 3 15.5psi - minimum 91 octane
- Requires Full Performance Exhaust
- +20.4 HP to the wheels
- Average of 168.4 Rear Wheel Horsepower
- Stage 3int 15.5psi - minimum 91 octane
- Requires Full Performance Exhaust & Intake
- +25.7 HP to the wheels
- Average of 173.7 Rear Wheel Horsepower
2017 Performance Tuning Stages - Stage 3 15.5psi - minimum 91 octane
- Requires Full Performance Exhaust
- +33 HP to the wheels
- Average of 155.8 Rear Wheel Horsepower
- Stage 3int 15.5psi - minimum 91 octane
- Requires Full Performance Exhaust & Intake
- +37.3 HP to the wheels
- Average of 160.1 Rear Wheel Horsepower
pwrTune ECU Reflash Features
- Increased Turbo Boost psi
- Removed Torque Limiters
- Removed Speed Limiters (optional)
- Improved Throttle Response over Stock
- Performance Spark Timing
- Optimized Fuel Maps for great power and throttle response
- Increased RPM limiter
- Suggested set to 8600rpm
- Totally optional, your choice stock or higher
- Lower cooling fan on/off temps
- Add the ability to start the engine with no brake in any gear
- No need for run a piggyback fuel controller
- Retains ECO mode
- Ready for your performance clutch tuning
- Free Warranty/Recall Flashback Protection*
- Upgrade your tune anytime and just pay the cost difference
|
|
|
 |
|
 |
|